Post Hole Concrete Calculator
Estimate the concrete around a square fence or deck post, with the post’s occupied space removed from the hole.
Measure the concrete fill
How this estimate works
A round hole has a cylinder volume: π × (diameter ÷ 2)² × fill depth. When the post is already in the hole, it occupies part of that space. For a square post, subtract post width² × fill depth. Multiply the difference by the number of identical holes, add your waste allowance, then divide by the bag yield.
Enter the actual measured width of the post, not just its nominal lumber name. Enter concrete fill depth after any gravel base or unfilled top section has been accounted for.
Worked example: four 12-inch holes
For four holes, each 12 inches across and filled 24 inches deep around a 3.5-inch square post: one hole’s cylinder holds about 1.571 ft³. The embedded post occupies about 0.170 ft³. Net concrete is about 1.401 ft³ per hole, or 5.603 ft³ total. With 10% extra, order about 6.163 ft³ (0.228 yd³). At 0.60 ft³ per 80 lb bag, round up to 11 bags.
Before you buy
Confirm the actual hole diameter and fill depth at the site. Soil conditions, frost depth, structural loads and post-setting method affect the design; this is a quantity estimate only. Check the yield on the chosen bag: fast-setting and specialty mixes may differ from the standard concrete-mix values used here.
For different-sized holes, calculate each group separately or use the multi-pour calculator and add the results.
Bag-yield source
Default yields follow the QUIKRETE Concrete Mix data sheet: about 0.30 ft³ for 40 lb, 0.45 ft³ for 60 lb and 0.60 ft³ for 80 lb. Always defer to the specific product label.
Second example: changing the post diameter
For a cylindrical hole 14 in in diameter and 30 in deep with a centered 4 in round post, the concrete annulus is π × (7² − 2²) × 30/12 ÷ 144 ≈ 2.45 ft³ per hole. Six identical holes need about 14.73 ft³ before extra allowance, or roughly 0.55 yd³. The post deduction matters most when the post occupies a meaningful share of a narrow hole.
A nominal 4 × 4 wood post is not necessarily a 4 in diameter circle. Use the calculator’s shape and actual measured post dimensions; a square post has a different cross-sectional area. If the hole flares at the bottom, a single cylinder will understate its volume.
Field checks before buying bags
When a post sits inside a drilled hole, subtract the post’s occupied space from the concrete volume. For a full concrete pier formed by a round tube, use the Sonotube concrete calculator instead; its cylinder is filled without subtracting a post.
Measure depth from the final concrete surface to the bottom of the fill, not automatically to the top of the excavation. A gravel layer, unfilled top gap or bell-shaped base changes the concrete quantity. Group holes by actual diameter and depth when they differ rather than assuming all are identical.
Post-hole mix may have product-specific placement instructions, water needs and setting times. Bag yield is a finished-volume estimate, not a structural or installation instruction. Confirm the product label and local requirements for post embedment, drainage and frost depth.
Read before you order
How many bags for four fence-post holes?
For one 12 in diameter hole with 24 in of concrete around an actual 3.5 in square post, the finished concrete volume is about 1.40 ft³. With 10% extra and a 0.60 ft³ yield, that is 3 whole 80 lb bags for one hole. Four identical holes need 11 bags when their volumes are combined before rounding; buying 3 per hole would mean 12 bags.
The table keeps the post width and fill depth fixed so the effect of hole diameter is visible. It assumes four cylindrical holes, each 24 in of concrete fill around an actual 3.5 in square post, 10% extra and 0.60 ft³ finished yield per 80 lb bag.
| Hole diameter | Exact concrete, four holes | 80 lb bags with 10% extra |
|---|---|---|
| 10 in | 3.68 ft³ | 7 |
| 12 in | 5.60 ft³ | 11 |
| 14 in | 7.87 ft³ | 15 |
These counts subtract only the square portion of each post inside the filled depth. A round steel post needs its circular cross-section, while an empty hole uses no post deduction. If a hole widens at the bottom, the straight-cylinder estimate can be low. Measure that wider section separately and check the yield printed on the mix you will buy.
Content and calculator by pourmeasure. Formula and assumption notes: methodology and sources. Updated October 2026. No independent engineering review is claimed.