CONCRETE BAG CALCULATOR

Concrete bag calculator

Know your pour volume? Convert it to a shopping list using the published yield for your bag size.

BAG ESTIMATE

Enter a known concrete volume

Bags to buy—
Adjusted volume—
Total dry bag weight—

Advertisements

Bag yield reference

For a standard concrete mix, the QUIKRETE product data sheet lists approximate yields of 0.30 ft³ for 40 lb, 0.45 ft³ for 60 lb and 0.60 ft³ for 80 lb bags. Divide required cubic feet by the listed yield, then round up to a whole bag.

Bag sizeApprox. yieldBags per yd³
40 lb0.30 ft³90
60 lb0.45 ft³60
80 lb0.60 ft³45

Worked example: 1.25 cubic yards

1.25 × 27 = 33.75 ft³. At 0.60 ft³ per 80 lb bag, 33.75 ÷ 0.60 = 56.25; round up to 57 bags. This is 4,560 lb of dry mix before water, so consider handling and delivery logistics.

Check the product you buy

Yield changes with formulation and product. Fast-setting, mortar and specialty mixes can differ. Use the yield on the actual package or technical sheet if it is different from these estimates. Bag count is a material estimate, not a mix design.

Before ordering: measurement and supplier checklist

Questions people ask

How many 80 lb bags make one cubic yard?

45 bags at 0.60 ft³ per bag, because one cubic yard is 27 ft³.

Why round up?

A partial bag is not a standard purchase unit. The calculator rounds up after applying the selected extra percentage.

Second example: a small repair

For a measured 6 ft³ repair and a 10% extra allowance, plan for 6.6 ft³. At 0.60 ft³ per 80 lb bag, that is 11 bags; at 0.45 ft³ per 60 lb bag, it is 15 bags. The smaller bag changes the number you lift, not the finished volume needed. Check the yield on the exact product before purchasing.

A bag-count comparison is useful only when both products are appropriate for the same job. Fast-setting, high-strength and standard mixes can have different placement instructions and working times. Do not substitute a product solely because its bag count looks cheaper.

Bag-count checks before loading

Multiply the rounded bag count by the printed bag weight to estimate the dry load. Eleven 80 lb bags weigh 880 lb before tools or passengers. Check the vehicle payload label, not a generic truck nickname, and account for the weight of people and equipment already in the vehicle.

A partial calculated bag always rounds up to a whole purchasable bag. Keep the extra allowance separate from this rounding: the first covers uncertainty in field measurement and placement, while the second only reflects packaging. Returning unopened bags may be possible, but supplier policies vary.

Read before you order

Hand mixing vs a mixer · Bags vs ready-mix

Check the purchasing unit

A store may sell single bags, pallets or a delivery service. Calculate the number of whole bags first, then ask how the store bills the quantity and whether unopened bags can be returned. A pallet count should never replace the product’s finished-volume yield. Keep the brand and bag weight with the estimate so a later switch to a different mix does not silently change the result. For a larger order, compare the dry load and number of batches with a ready-mix quote.

Confirm product yield and transport

Before checking out, save the bag size, printed yield and chosen extra percentage with your result. Two stores can sell the same bag weight with different mixes or packaging, and substituting one without changing the entered yield changes the estimate. Count whole bags after allowance, then compare the dry load with transport capacity and the intended mixing plan. A whole-bag order may leave a small surplus, but it is easier to explain than rounding the geometric volume prematurely.

Content and calculator by pourmeasure. Formula and assumption notes: methodology and sources. Updated October 2026. No independent engineering review is claimed.