Concrete Wall Volume Calculator
Enter the finished concrete dimensions of a solid, uniform wall. Use the number field for identical wall sections only.
How the calculation works
Volume in cubic feet = length in feet × height in feet × (thickness in inches ÷ 12) × count. Divide by 27 for cubic yards and add the selected waste percentage.
Worked example
One wall 20 ft long, 4 ft high and 6 in thick has 40 ft³ of concrete, or 1.48 yd³. With 10% extra, the order estimate is 1.63 yd³ or 74 bags at 0.60 ft³ each.
Before you order
Openings, pilasters, footings and block cores are not subtracted. Form pressure, reinforcement and wall thickness require project-specific engineering; this tool only estimates solid volume.
Review the calculation method and source notes, then use the supplier checklist before placing an order.
Cast-in-place wall measurement
A solid straight wall uses length × height × thickness. Convert thickness in inches to feet before multiplication. Measure openings such as doors and large penetrations separately if they displace a meaningful volume; this tool does not subtract them automatically.
For a wall with changing height, divide it into segments and sum each segment. A footing below the wall is another pour and should be calculated separately. Form ties, reinforcement, placement method and bracing are design matters beyond this volume estimate.
Questions before you order
Does this include the footing?
No. Use the footing calculator for the footing and add both volumes in the multi-pour estimator.
Can I subtract a doorway?
This tool does not subtract openings automatically. Calculate the opening volume and subtract it from the gross wall volume before ordering.
Can I use it for a hollow CMU wall?
No. It estimates a solid cast-in-place wall, not block fill or mortar.
Continue planning
Second example: an opening
A solid 20 ft long wall, 4 ft high and 6 in thick contains 40 ft³, or 1.48 yd³. A 3 × 3 ft opening through the full 6 in thickness removes 4.5 ft³, leaving 35.5 ft³ before allowance. Check whether a lintel, pilaster or return around the opening adds a separate volume. The current wall calculator estimates the gross rectangle; make any opening adjustment explicitly.
Changing wall height should be split into measured segments rather than averaging an unknown profile. Form pressure, bracing, reinforcement and structural capacity are not determined by cubic yards. Check the wall dimensions and pour method against the project drawings and discuss access and placement with the supplier.
Read before you order
Reconcile forms and openings
A cast-in-place wall may include returns, pilasters, openings or a stepped top. Treat each distinct solid shape as a separate measured volume and subtract only openings that actually remain unfilled. The wall calculator uses a uniform rectangular section, so it cannot automatically account for all these details. Keep a sketch beside the arithmetic and check it against the approved formwork. If the pour includes a footing below the wall, calculate that footing separately without counting shared concrete twice.
Document openings and added features
For a wall with a doorway, first calculate the full rectangular wall and then subtract the opening volume using its width, height and wall thickness. Add any separately measured returns, pilasters or lintel volume that the drawing includes. Write every adjustment on the sketch; an unexplained net cubic-yard number is hard to audit. If the wall thickness changes along its length, divide it into measured segments. Formwork, reinforcement and pour sequence require separate project-specific planning.
Content and calculator by pourmeasure. Formula and assumption notes: methodology and sources. Updated October 2026. No independent engineering review is claimed.